The YS-01, the best-selling strobe in its class has been redesigned, boasting improved performance. Equipped with the same DS-TTL ll circuitry as superior Sea & Sea's high-end models. The DS-TTL ll circuitry helps emit the correct amount of light automatically based upon light intensity from the camera's onboard flash. The strobe allows you to adjust light intensity stronger or weaker from programed standard exposure. With this function, even an inexperienced underwater photographer can instinctively control the desired amount of light. Example: If you are using two YS-01 Solis strobes, one on the right and the other on the left, and there is white soft coral to the right of your photographic subject, you can just delicately lessen light intensity from the strobe on the right alone by just turning the light level control to minus. With the improved circuitry, you can realize desired lighting for all your underwater images in a breeze.
Increased light intensity from the target light. Compared with the predecessor model, lighting intensity of the YS-01 Solis' target light is 40% stronger increasing the visibility of the light axis has improved helps you understand position of the strobe position more accurately. Superior light distribution and wide beam angle. Because of exclusively designed prism lens, the YS-01 Solis realizes a wide beam angle of 100-degrees x 100-degrees with ideal flat light distribution even when the accessory diffuser is not attached. With the diffuser, light will soften, and beam angle will increase to 110-degrees x 110-degress.
The YS-01 Solis Strobe has a guide number of (ISO 100/m) (land) 20, is powered by 4x AA alkaline batteries 6V or 4x AA Ni-MH batteries 4.8V and provides 230 flashes with alkaline batteries and with Ni-MH 300 flashes. Recycle time (full) is 2.5 seconds with alkaline batteries and with Ni-MH batteries 1.9 seconds. The strobes color temperature is 5600-degrees K and with the diffuser 5250-degrees K. Unit is depth rated to 250' (75m), measures (W x H x D) 4" x 4.4" x 5.1" (75mm x 111mm x 129mm), weighs 14.7 oz. (441 g) without batteries while attached to a fixing bolt and approximate buoyancy is positive 0.35 oz. (60 g) with batteries underwater. Exposure control: DS-TTLII +4 steps -5 steps. Light level control dial (GN): 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps). Pre-flash control: Equipped with pre-flash cancel mode, DS-TTLII function, auto power off function, sync cord: Fiber-optic cable has an over-pressure relief valve and LED target light. Included with the YS-01 Solis Strobe are a diffuser, diffuser strap, fixing bolt, and tube of silicone grease.
This product can only be shipped to U.S. addresses.
- Color - Black
- Guide Number - 20 (ISO 100/m) (land)
- Beam Angle - 100 Degree x 100 Degree (with diffuser 110 Degree x110 Degree )
- Batteries - 4xAA A: 6V, Ni-MH: 4.8V
- Number of Flashes - A: 230, Ni-MH: 300
- Recycle time (full)A: 2.5 sec., Ni-MH: 1.9 sec.
- Color temperature - 5600K
- Color temperature with diffuser - 5250K
- Depth rating250' (75m)
- Exposure control - DS-TTLII +4steps -5steps
- Light level control dial (GN) - 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps)
- Pre-flash control - Equipped with pre-flash cancel mode
- Sync cord - Fiber-Optic Cable
- Dimensions (W x H x D) - 4 x 4.4 x 5.1" (75 x 111 x 129mm)
- Weight - 14.7 oz (441g) (w/o batteries) (Attached a fixing bolt to the Strobe.), Underwater: Approx.0.35 oz (60g) (w/ batteries)
YS-01 Solis Underwater Strobe with DS-TTLII Function
DiffuserDiffuser Strap
Silicone Grease
Fixing Bolt
Sea & Sea 1 Year Limited Warranty
|