![](/v/vspfiles/templates/Accent/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/Accent/images/clear1x1.gif) |
![](/v/vspfiles/templates/Accent/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/Accent/images/DBox_Border_Left_MidDiv.gif) |
![](/v/vspfiles/templates/Accent/images/clear1x1.gif) |
![](/v/vspfiles/templates/Accent/images/DBox_Border_Right_MidDiv.gif) |
![](/v/vspfiles/templates/Accent/images/clear1x1.gif) |
Features
- Tube in a tube design gives the operator the performance of a tubular steel rod that burns exothermic.
- Oxygen flows through the center of the rod and comes out in a tight stream giving the diver a more defined kerf and reduces oxygen consumption by up to 25%.
- High visibility heat shrink insulation insures that the rods are easy to see in low visibility and insulation will not peel off like rods wrapped with electrical tape.
- Proprietary plating process on outer tube will not corrode and eliminates requirement for cleaning the ends of rods so they will go in the collet.
- Conveniently packaged: Ten rods are sealed in a plastic bag.
- Bags are packed in a plastic box that will not fall apart when wet.
|
|
![](/v/vspfiles/templates/Accent/images/clear1x1.gif) |
![](/v/vspfiles/templates/Accent/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/Accent/images/clear1x1.gif) |
![](/v/vspfiles/templates/Accent/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/Accent/images/clear1x1.gif)
|