Home > Diving Equipment > Tools >

Oceanears DRS-8 Underwater Speaker w/ Transformer Assembly, Pin Suspension Design & 50 ft of Cable

Oceanears DRS-8 Underwater Speaker w/ Transformer Assembly, Pin Suspension Design & 50 ft of Cable
 
Alternative Views:
Does not qualify for free shipping
Our Price: $1,900.00
Vendor: Oceanears


Availability: Build to order, usually ships in 3-4 Weeks Direct from the Manufacturer
Product Code: DRS-8
Qty:

Description What's in the box
 
Oceanears low-cost underwater speakers and loudspeakers are designed for use in diver recall systems, synchronized swimming sound systems, marine mammal recording and playback sound systems and any other system needing a hi-quality, low-cost means of projecting sounds underwater.
The OCEANEARS DRS-8 Portable Underwater Speaker is a state of the art Piezoelectric Flexural Disc Transducer that will provide years of reliable service and pleasing music underwater. The speaker comes with 50 feet of cable and uses our Pin Suspension Design. The Standard Warranty is FIVE Years. One speaker for a 25 yard 6 lane pool for music.
Features
  • State of the art in PIEZOELECTRIC FLEXURAL DISK TECHNOLOGY!
  • LONG LIFE CONSTRUCTION WITH PVC AND EPOXY.
  • Will not rust or corrode even if used in saltwater. Can be used in swimming pools with salt generators.
  • Galvanic corrosion has been eliminated. Non-Magnetic materials.
  • No metal exposed to the water, reducing the potential for electric shock.
  • No voice coil to burn out.
  • A completely passive, non-powered device. UL, CSA and CE are not required.
  • Acoustic power to spare with high efficiency.
  • Deep depth capability (130 feet/40 meters).
  • 8.5 inch (21.6 cm) diameter. 2.2 inch (5.6 cm) axial length.
  • Weighs only 4.5 pounds (2.0 Kg) in air.
  • Supplied with 50 feet (30 meters) of cable (Suprene 105, 18 AWG, 3/C SE00W, (UL) 600V, -60C to 105C, CSA LL39753 ST00W (TPE) 600 V, water resistant FT2).
  • Uses readily available Neutrik connectors.
  • Input power rating: 400 watts maximum – EM-0611 Transformer. 200 watts maximum – EM-0635 Transformer(Optional).
  • Underwater Speaker Input Impedance: 4000 ohms.
  • Frequency range: 200 Hz to 32 KHz. Directional at higher frequencies.
  • Omni-directional beam pattern at 2 KHz.
  • Impedance varies with frequency but can be matched to 4 or 8 Ohm amplifier output tap with the included audio isolation impedance matching transformer assembly.
  • OPTIONAL: 70 Volt and 100 Volt transformers.
  • Can also be used as a receive hydrophone for underwater listening.
  • WARRANTY: Five years
  • The ONLY underwater speaker on the market that can be used as an air speaker without voiding the manufacturer’s warranty.
  • MADE in USA

Share your knowledge of this product with other customers... Be the first to write a review