 |
 |
 |
|
One of the more popular items for commercial and military divers is the famous Monkey Heater, an innovative hot water heater with many advantages over its predecessors.
The new Monkey Heater unit is smaller and lighter than previous models, incorporating a number of features including detachable fuel tanks, which make fuel transfer a breeze. Standard on every system is a small, submersible water pump (eliminating pump-priming difficulties) that moves up to eleven gallons of water per minute. The pump comes with a 25-foot umbilical, while the heater unit includes an LED digital read-out for monitoring water temperature, with a range of up to 250 degrees Fahrenheit.
Heat is supplied by a diesel-fired burner capable of 350,000 BTU. Custom Design & Fabrication Ltd. has also incorporated a manual fuel pressure adjustment that enables divers to maintain a constant water temperature when the system is in use. The variation in temperature is maintained at plus or minus one degree, a great improvement over older systems. The Monkey Heater system uses an adjustable high temperature shut-off to shut down automatically should the water temperature become too warm. In addition, it has a special flow switch that will shut the system down should the water supply be accidentally cut off. The entire electrical system is sealed and can be operated outdoors in moist environments.
- Weight: 430 lbs / 195 kg
- Voltage: 220V / 60 Hz Single Phase 20 Amp
- BTU: 350,000
- Operating Output Temperature: +/- 1° F
- Outlet Water Temperatures: In excess of 200° F, depending on the size of the fuel nozzle used and the inlet water temperature
- Submersible Water Pump: 11 GPM
- Pumping-lift Head Pressure Capability: 600 feet at 40 PSI
- Dimensions: 30-1/4 in. H x 26 in. W x 46 in. D (77 cm H x 66 cm W x 116 cm D)
- Monkey Heater Hot Water System in Lifting/ protection frame.
- Includes intake pump and hose
- Manual
|
|
|
 |
|
 |
|